Auto & Manual
Plating Lines
Hoists
Process Tanks
Filters
Rectifiers & Pulse Units
Centrifugal Dryers
Misc. Accessories
Used Plating Equipment
 
Used Plating Equipment
Used plating systems, tanks, hoists & rectifiers
decommissioning service
Buyers & Sellers of Used Plating Equipment
Contact Us
 
   BRAND NEW, NEVER INSTALLED EXHAUST EQUIPMENT Item #082
BRAND NEW, NEVER INSTALLED EXHAUST EQUIPMENT
This exhaust fan, and fan-scrubber were delivered in January of 2010 to a large aeronautical firm, who later decided NOT to install.  The package includes all hardware, main motor control center, ductwork, remote recirculation system and steel mezzanine structure on which to mount the scrubber, including all stairs, catwalk, etc.

We are able to offer this equipment at approx 55% of the original price.
Item 1 - 19,800 cfm exhaust fan/system
• (1) PVC AMCA certified fan, belt driven with a 20hp, 1750 rpm, 460/3/60 TEFC motor
• Fan has a 1/4" thick PVC housing and FRP wheel
• (1) PVC 36" diameter stack for the above fan, height to be approx. 5' above fan outlet
• (1) Control Panel, NEMA 12 rated enclosure, with panel to include the following:
System start/stop switch
Fan hand-off auto switch
Control panel disconnect switch
Fuses for fan motor
Item 2 - Fan/scrubber system for 46,200 cfm
• (1) PVC horizontal scrubber constructed of 3/16" PVC material, complete with 60"    depth of packing and a mist eliminator. The mist eliminator will remove 99% of droplets    of 20 microns or larger.  The recirculating rate through the scrubber will be 250 to 270    gpm with fresh water make-up of .3-.5% of the recirculation rate. Two (2) CPVC vertical    5 HP pumps will be mounted directly to a remote tank. All of the scrubber internals are    non-fragile materials that are resistant to the chemical attack of acids and alkalis.    Each spray header with spray nozzles is designed for easy removal.
• (1) PVC remote recirc tank; 60“dia. by 54“high with a cap. of 725 gallons (see photo)
• (1) pH control package (controller, probe, and metering pump)
• (1) PVC AMCA certified fan, belt driven with a 50 hp, 3450 rpm 460 volts, 3 phase, and    60 hertz TEFC motor.  The fan has 1/4" thick PVC housing material and FRP wheel.
• (1) PVC 56“dia. stack for the above fan, height to be approximately 5’ above fan outlet.
• (1) Control Panel, NEMA 12 rated enclosure, with panel to include the following:
System start/stop switch
Fan hand-off auto switch
Fan & pump motor starters
Control panel disconnect switch
Fuses for fan motor & pumps
• Pilot lights each of the following system functions:
Control panel power ON
Fan motor ON
Pump Motor ON

Baker Technology Associates Used Plating Equipment